Month: June 2018

No RMS templates are available in your organization

No RMS templates are available in your organization

Problem:

When configuring a transport rule for ‘Apply Office 365 Message Encryption and rights protection to the message with…” you receive the following error when attempting to select a label:

“No RMS templates are available in your organization”

No RMS Templates

Solution:

You need to configure Exchange Online for RMS. See below for powershell commands:

#Configure Credentials
$cred = Get-Credential

# Configure Exchange Online PS Session
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell/ -Credential $Cred -Authentication Basic –AllowRedirection

# Import Exchange Online PS Session
Import-PSSession $Session

# Configure the RMS Online Key Sharing Location (Note that this url changes based on location – See the bottom of this article for locations)
Set-IRMConfiguration –RMSOnlineKeySharingLocation “https://sp-rms.eu.aadrm.com/TenantManagement/ServicePartner.svc”

# Import the RMS Trusted Publishing Domain
Import-RMSTrustedPublishingDomain -RMSOnline -name “RMS Online”

# Test the IRM Configuration to ensure that Exchange is configured correctly
Test-IRMConfiguration -RMSOnline

The output of this command should look something like this, with the overall result as PASS.
Results : Checking organization context …

– PASS: Organization context checked; running as tenant administrator.
Loading IRM configuration …
– PASS: IRM configuration loaded successfully.
Checking RMS Online tenant prerequisites …
– PASS: RMS Online tenant prerequisites passed.
Checking RMS Online authentication certificate …
– PASS: The RMS Online authentication certificate is valid.
Checking that a Trusted Publishing Domain can be obtained from RMS Online …
– PASS: Trusted Publishing Domain successfully obtained from RMS Online. Templates available:
Confidential \ All Employees, Highly Confidential \ All Employees, Secure Email.
Checking that the Trusted Publishing Domain obtained from RMS Online is valid …
– PASS: Trusted Publishing Domain obtained from RMS Online is valid.

OVERALL RESULT: PASS

# Set the IRM Internal Licencing to True
Set-IRMConfiguration -InternalLicensingEnabled $true

Give Exchange Online 20 minutes to see the update and you should then be able to see the Templates.

Global policy issue:

Currently there is a bug with Exchange Online not being able to see labels that are NOT included in the ‘Global’ Azure Information Protection Policy. This is being investigated by Microsoft at the time of writing this article.

 

RMS Key Sharing Location URLs:

North America
https://sp-rms.na.aadrm.com/TenantManagement/ServicePartner.svc

European Union
https://sp-rms.eu.aadrm.com/TenantManagement/ServicePartner.svc

Asia
https://sp-rms.ap.aadrm.com/TenantManagement/ServicePartner.svc

South America
https://sp-rms.sa.aadrm.com/TenantManagement/ServicePartner.svc

Office 365 for Government (Government Community Cloud)
https://sp-rms.govus.aadrm.com/TenantManagement/ServicePartner.svc

Sage Antivirus Exclusions – Powershell Script for Windows Defender

Sage Antivirus Exclusions – Powershell Script for Windows Defender

Sage Company Logo

What does this Powershell Script do?

This is a simple Powershell Script to automate the process of adding Exclusions for Sage Accounts into Windows Defender

It will carry out the File and Folder exclusions listed in the following Sage Article:
https://my.sage.co.uk/public/help/askarticle.aspx?articleid=12122

It Will NOT add the URL Exclusions.

The Script has been tested on the following Operating Systems:

Windows 10 32-Bit
Windows 10 64-Bit

The Script:

Download: Sage-Exclusions-Windows-Defender

Remember to run the Script as an Administrator.


Write-Host "Adding Sage Anti-Virus Exclusions" -ForegroundColor Green
Write-Host "Excluding Data Files Extensions" -ForegroundColor Yellow
Add-MpPreference -ExclusionExtension DTA, DTH, COA, S50
Write-Host "Excluding Report and Layout File Extensions" -ForegroundColor Yellow
Add-MpPreference -ExclusionExtension SRT, SLY, SLT, SLB, RPT
Write-Host "Excluding Sage Account File Extensions" -ForegroundColor Yellow
Add-MpPreference -ExclusionExtension report, layout, letter, label
Write-Host "Excluding Memo Files" -ForegroundColor Yellow
Add-MpPreference -ExclusionExtension SLM, PLM, NLM, ILM, BLM, CLM, DLM
Write-Host "Excluding Critera Files" -ForegroundColor Yellow
Add-MpPreference -ExclusionExtension SLC, SLI, PRC, PRO, NMC, NMI, BKC, BKI, SKI, IVC, IVI, SPC, SPI, PCC, PPI, PCI, REC, REI, SAC, SAI, IPC, IPI, PDC, PDI
Write-Host "Excluding Folders used by Sage Accounts (32-Bit and 64-Bit)" -ForegroundColor Yellow
Add-MpPreference -ExclusionPath "C:\Program Files\Common Files\Sage SBD"
Add-MpPreference -ExclusionPath "C:\Program Files (x86)\Common Files\Sage SBD"
Add-MpPreference -ExclusionPath "C:\Program Files\Common Files\Sage Line50"
Add-MpPreference -ExclusionPath "C:\Program Files (x86)\Common Files\Sage Line50"
Add-MpPreference -ExclusionPath "C:\Program Files\Common Files\Sage Report Designer 2007"
Add-MpPreference -ExclusionPath "C:\Program Files (x86)\Common Files\Sage Report Designer 2007"
Add-MpPreference -ExclusionPath "C:\Program Files\Common Files\Sage Shared"
Add-MpPreference -ExclusionPath "C:\Program Files (x86)\Common Files\Sage Shared"
Add-MpPreference -ExclusionPath "C:\Program Files\Sage EBanking"
Add-MpPreference -ExclusionPath "C:\Program Files (x86)\Sage EBanking"
Add-MpPreference -ExclusionPath "C:\Program Files\Sage"
Add-MpPreference -ExclusionPath "C:\Program Files (x86)\Sage"
Add-MpPreference -ExclusionPath "C:\ProgramData\Sage"
Write-Host "Script Complete" -ForegroundColor Green

For large organisations using Sage it is suggested that you configure the exclusions either via your Anti-Virus Management Console or via GPO.

How to completely remove Sage Accounts (V18 to V24) via Powershell

How to completely remove Sage Accounts (V18 to V24) via Powershell

Sage Accounts Company Logo

What is this:?

This is a Powershell Script to automate the removal of Sage Accounts version 18 to version 24 from a PC.

The script accomplishes the steps in Sage Article 31544:
https://my.sage.co.uk/public/help/askarticle.aspx?articleid=31544

Steps carried out to remove Sage Accounts:

Removes DSN and ODBC data sources

Deletes the following shared folders:
C:\Program Files\Common Files\Sage SBD
C:\Program Files\Common Files\Sage Line50
C:\Program Files\Common Files\Sage Report Designer 2007
C:\Program Files\Common Files\Sage Shared
C:\Program Files\Sage EBanking

Delete shared Sage files GAC, GAC_32 and GAC_MSIL

Deletes Sage files in the following locations:
C:\Windows\System32
C:\Windows\SYSWOW64\

Deletes the C:\ProgramData/Sage/Accounts Folder

Important Notes:

1) You must run the script as an Administrator

2) You must ensure that the correct execution policy is enabled on the PC

3) Do NOT use this script on a PC which has other Sage software installed on it (Payroll / ACT / Job Costing etc). If you do, it will likely break them and possibly cause data loss.

4) If the Sage Accounts or Payroll Company Data located on the machine that you MUST take a backup prior to running the script.

5) As per the above, this script removes the Sage Company Data located in C:\ProgramData\Sage\Accounts

6) You may see some error when it’s trying to remove some of the Sage software. This is due to the main Sage uninstaller removing the other installed (I.E. Sage Data Service). Sometimes however the main installer doesn’t work hence leaving this in the script.

7) The script will NOT remove .NET

8) It’s suggested that you read the script before blindly running it

9) I take no liability for any Damage caused from the use of this script. It is supplied as is. I’m not a scripting expert, I’ve just thrown it together. I’m sure there are better ways to do this.

10) Any suggested changes to the script are welcome. Feel free to drop me a comment with your suggestions.

Tested on the following Operating Systems:

Windows 10 64-Bit
Windows 10 32-Bit

The Sage Removal Script:

Download here:
Sage-Removal (V18 to V24)

$message = 'We recommend that you take a backup before running this script, it will delete ALL Sage files, INCLUDING Company Data'
$question = 'Are you sure you want to proceed?'
$choices = New-Object Collections.ObjectModel.Collection[Management.Automation.Host.ChoiceDescription]
$choices.Add((New-Object Management.Automation.Host.ChoiceDescription -ArgumentList '&Yes'))
$choices.Add((New-Object Management.Automation.Host.ChoiceDescription -ArgumentList '&No'))
$decision = $Host.UI.PromptForChoice($message, $question, $choices, 1)
if ($decision -eq 0) {
Write-Host 'confirmed'
} else {
Write-Host 'Uninstallation Cancelled'
exit
}
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "Stopping Sage Services"
Stop-Service *Sage*
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "Removing System DSNs"
Write-Host "Checking for and removing; OBDC 64-Bit SageLine50v18"
Remove-OdbcDsn -Name "SageLine50v18" -DsnType "System" -Platform 64-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 64-Bit SageLine50v19"
Remove-OdbcDsn -Name "SageLine50v19" -DsnType "System" -Platform 64-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 64-Bit SageLine50v20"
Remove-OdbcDsn -Name "SageLine50v20" -DsnType "System" -Platform 64-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 64-Bit SageLine50v21"
Remove-OdbcDsn -Name "SageLine50v21" -DsnType "System" -Platform 64-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 64-Bit SageLine50v22"
Remove-OdbcDsn -Name "SageLine50v22" -DsnType "System" -Platform 64-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 64-Bit SageLine50v23"
Remove-OdbcDsn -Name "SageLine50v23" -DsnType "System" -Platform 64-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 64-Bit SageLine50v24"
Remove-OdbcDsn -Name "SageLine50v24" -DsnType "System" -Platform 64-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "All 64-Bit ODBC Entries have been removed"
Write-Host "Checking for and removing; OBDC 32-Bit SageLine50v18"
Remove-OdbcDsn -Name "SageLine50v18" -DsnType "System" -Platform 32-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 32-Bit SageLine50v19"
Remove-OdbcDsn -Name "SageLine50v19" -DsnType "System" -Platform 32-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 32-Bit SageLine50v20"
Remove-OdbcDsn -Name "SageLine50v20" -DsnType "System" -Platform 32-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 32-Bit SageLine50v21"
Remove-OdbcDsn -Name "SageLine50v21" -DsnType "System" -Platform 32-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 32-Bit SageLine50v22"
Remove-OdbcDsn -Name "SageLine50v22" -DsnType "System" -Platform 32-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 32-Bit SageLine50v23"
Remove-OdbcDsn -Name "SageLine50v23" -DsnType "System" -Platform 32-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Checking for and removing; OBDC 32-Bit SageLine50v24"
Remove-OdbcDsn -Name "SageLine50v24" -DsnType "System" -Platform 32-bit -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "All 32-Bit ODBC Entries have been removed"
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
#
#
#### Uninstall Sage Accounts Program #####
#
#
#
Write-Host "Uninstalling Sage Software with their uninstallers"
$app = Get-WmiObject -Class Win32_Product | Where-Object {$_.Vendor -Like "Sage (UK) Ltd"}
$Name = $app.name
foreach ($a in $app){$app.Uninstall()
Write-Host "Uninstalling $a.Name"
}
#
#
#
#### Remove Sage Program Files and content #####
#
#
Write-Host "Removing Files from C:\Program Files"
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Remove-Item "C:\Program Files\Sage\Accounts" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Remove-Item "C:\Program Files (x86)\Sage\Accounts" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Remove-Item "C:\Program Files\Common Files\Sage SBD" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Remove-Item "C:\Program Files\Common Files\Sage Line50" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Remove-Item "C:\Program Files\Common Files\Sage Report Designer 2007" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Remove-Item "C:\Program Files\Common Files\Sage Shared" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Remove-Item "C:\Program Files\Sage EBanking" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Remove-Item "C:\Program Files (x86)\Sage\Assemblies" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
#
#
##### Get a list of Sage DLL Files from GAC and Uninstall with Regsvr32 #####
#
#
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "Removeing Files in GAC"
Get-ChildItem -Path C:\Windows\Assembly\GAC -Recurse -Include Sage* -ErrorAction SilentlyContinue | foreach ($_) {Remove-Item $_.FullName -Recurse -Confirm:$true}
Get-ChildItem -Path C:\Windows\Assembly\GAC_32 -Recurse -Include Sage* -ErrorAction SilentlyContinue | foreach ($_) {Remove-Item $_.FullName -Recurse -Confirm:$true}
Get-ChildItem -Path C:\Windows\Assembly\GAC_MSIL -Recurse -Include Sage* -ErrorAction SilentlyContinue | foreach ($_) {Remove-Item $_.FullName -Recurse -Confirm:$true}
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
#
#
##### Delete Sage DLL's from SYSWOW64 (64-Bit) #####
#
#
Write-Host "Removing files from SYSWOW64"
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Get-ChildItem -Path C:\Windows\SysWOW64\ -Recurse -Include sdoEng*.*, S23DBC32.dll, sg50SdoEngine230.dll, S22DBC32.dll, sg50SdoEngine220.dll, S21DBC32.dll, sg50SdoEngine210.dll, S20DBC32.dll, sg50SdoEngine200.dll, S19DBC32.dll, sg50SdoEngine190.dll, S18DBC32.dll, sg50SdoEngine180.dll, S17DBC32.dll, sg50sdoengine170.dll -ErrorAction SilentlyContinue | foreach ($_) {Remove-item $_.FullName} -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
#
#
##### Delete Sage Dll's from System32 (32-Bit) #####
#
#
Write-Host "Removing Files from System32"
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Get-ChildItem -Path "C:\Windows\System32\" -Include sdoEng*.*, S23DBC32.dll, sg50SdoEngine230.dll, S22DBC32.dll, sg50SdoEngine220.dll, S21DBC32.dll, sg50SdoEngine210.dll, S20DBC32.dll, sg50SdoEngine200.dll, S19DBC32.dll, sg50SdoEngine190.dll, S18DBC32.dll, sg50SdoEngine180.dll, S17DBC32.dll, sg50sdoengine170.dll, S24DBC32.DLL -ErrorAction SilentlyContinue | foreach ($_) {Remove-item $_.FullName} -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
#
#
##### Delete other Sage files and DLL's from System32 #####
#
#
Write-Host "Removing more files from System32"
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Get-ChildItem -Path "C:\Windows\System32\" -Include RepDes32.exe, repdes.cnt, SageBankBalances.tlb, SageBankPayments.tlb, SageBankReconciliation.tlb, SageEventHandler.Config, SageEventHandler.exe, SageFolderBrowser.dll, SG3D32.DLL, sg50Ps32.dll, SGAPPBAR.DLL, SGCDLG32.DLL, SGCOM32.DLL, SGCtrlEx.dll, SGDT32.DLL, SgESchema.xsd, SGHELP32.DLL, SgHmZLib.dll, SGINTL32.DLL, SGJPEG32.dll, SGLCH32.DLL, SGLCH32.USR, SGLIST32.DLL, SGLOGO32.DLL, SGOEdit.ocx, SGOList.ocx, SGOPopDg.dll, sgopopup.ocx, SGOSize.ocx, SGOTBar.ocx, SGRegister.dll, SGRegister.tlb, SGRep32.dll, SGSchemeDefault.dll, SGSchemeManager.dll, SGSchemeXml.dll, SGSchemeXP.dll, SGSTAT32.DLL, SGSTDREG.dll, SGStdReg.tlb, SGTBAR32.DLL, SGTOOL32.DLL, SGWebBrowser.dll -ErrorAction SilentlyContinue | foreach ($_) {Remove-item $_.FullName} -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
#
#
##### Delete other Sage files and DLL's from SYSWOW64 #####
#
#
#
#get-childitem 'C:\My Web Sites\' -recurse -Include Pass* | foreach ($_) {Remove-item $_.Attributes.Equals(Sage*)}
Write-Host "Removing User Temp Files"
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Remove-Item "C:\Users\$env:Username\AppData\Local\Temp" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "Removing Program Data Files"
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Remove-Item "C:\ProgramData\Sage" -Force -Recurse -ErrorAction SilentlyContinue | Out-File .\Sage-Removal.txt -Append
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "Sage has been uninstalled"
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "Removing Sage Installer from Package Cache location"
$Uni = Get-ChildItem -Path HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall, HKLM:\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall |
Get-ItemProperty |
Where-Object {$_.DisplayName -match "Sage 50 Accounts" } |
Select-Object -Property DisplayName, UninstallString
ForEach ($ver in $Uni) {
If ($Uni.UninstallString) {
$uninst = $ver.UninstallString
Start-Process cmd -ArgumentList "/c $uninst /quiet /norestart" -NoNewWindow
}
}
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "....."
Write-Host "Please now manually check Programs and Features in Control Panel and remove any leftover installers"

Products from Amazon.co.uk